Pinzgauer

Internal 10 tooth with a helical angle. (DOES NOT COME WITH THE METAL SHAFT) May also require Lead Gear from below. En savoir plus

There are 3 different sizes for the odometer lead gear. The best way to check the gear is to make sure it is tight on the shaft, it should not spin. All you need to do is measure the overall thickness before you order a new gear. The 3 sizes are: 1. ~3.2mm 2. ~4.8mm 3. ~6.4mm En savoir plus

Odometer gears for Pinzgauer / Steyr with mechanical VDO Speedometers / Odometers. ( cable driven) Tooth count option between 10 and 25 teeth. Please count teeth on the original gear before you order a new one. We also recommend to inspect the lead gear, make sure it is tight on the shaft. En savoir plus

Three Odometer Gear Set for VDO Instrument Clusters only. (Electronic Speedometer) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 21 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 En savoir plus